Ahead of the curve
Mandrel Bending
Ogis specialises in CNC mandrel tube and pipe bending from as little as 6mm (1/4 inch) diameter up to 88.9 (3 ½ inch) diameter.
Mandrel Tube & Pipe Bending Tooling List
Tube – Mandrel Tube Bender Dies and Tooling
| Tube Type | Tube (Dia./Size (mm) | Radius CLR (mm) |
|---|---|---|
 | 6.0 | 9, 18 |
| 9.5 | 30, 60, 75 |
| 12.7 | 20, 31.75, 34, 45 |
| 14.29 | 20 |
| 15.88 | 20, 31.75, 50, 75 |
| 19 | 40, 47.5, 53, 56, 57, 62, 75, 105, 113, 120 |
| 22.2 | 44.5, 45, 70, 159 |
| 25.4 | 40, 50, 63.5, 69, 82, 82.5, 125, 210, 275 |
| 28.6 | 76, 89 |
| 31.8 | 50, 60, 63.5, 76, 80, 101, 121, 127, 245 |
| 38.1 | 63.5, 76, 95 |
| 50.8 | 76.2, 125, 150, 300 |
| 63.5 | 95 |
| 76.2 | 114 |
 | 19 x 19 | 40, 57, 75, 76.5, 81, 200 |
| 25.4 x 25.4 | 52.5, 62, 73, 87, 88, 94, 210 |
| 30 x 30 | 135 |
| 31.8 x 31.8 | 60 |
 | 31.8 x 16 | 65 |
| 16 x 31.8 | 60 |
Pipe – Mandrel Pipe Bender Dies and Tooling
| Pipe Type | Pipe (Dia./Size (mm) | Radius CLR (mm) |
|---|---|---|
| 8NB (13.5) | 100 |
| 10NB (17.2) | 50, 75, 100 |
| 15NB (21.3) | 45, 75 |
| 20NB (26.9) | 90 |
| 25NB (33.7) | 50, 65, 75, 101, 150 |
| 32NB (42.4) | 63, 98, 127, 150, 300 |
| 40NB (48.3) | 57, 150 |
| 50NB (60.3) | 95, 150, 300 |
| 65NB (76.1) | 150, 250 |
| 80NB (88.9) | 153, 225 |
Please note that new tooling can be manufactured as required to suit your product design.
Contact us with your quote request. Request A Quote >>
Rolling
Rolling allows for greater diameter variety by eliminating the need for specific tooling.
Rolling can be performed on angle (toe in or out), round bar, flat bar, wire, as well as aluminium extrusions.
Our NC roller is capable of rolling arcs, circles, coils, ovals and different radii sections.
Sizes range from 4mm diameter wire up to 60.3mm diameter pipe.
02 9313 3777